SOLID CARBIDE ENDMILL, TIALN COATED, FOR STEEL MACHINING, 2 FLUTED, 0.50MM CORNER RADIUS, DIA 7.68MM, SHANK DIA 8MM, FLUTE LENGTH 20MM, OAL 63MM

“SHIVMAC”    Make

MAC2000ECO Grade  - Solid Carbide Endmills ( 2 FLUTED ) with Corner radius  - 0.500 mm 

Flat End     - 2 Fluted    -     TiAlN  Coated

Model No. :   SCCREM7.68X20X63X8XTiAlNX2FX0.5CR

About The Endmill :

1.    High Performance Solid Carbide Endmill  - Always One Step Ahead in competition.

2.    Coated with TiAlN Coating  - The latest in recent PVD Coating Technology.

3.    Universal Geometry for all types of Metal Application – Most suitable for Steel machining.

4.    Manufactured with Edge Corner Protection - Having Corner Radius 0.50 mm 

5.    Helix Angle 30°

6.    Made from Ultrafine Grade of Solid Carbide Rods – P30

7.    Flat Relief Angles on cutting edges suitable for wide range of milling applications.

8.    Latest End Face Geometry for Long life Face Milling – Most Suitable for Centre Cutting Application.

9.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

10. Hardness :: Workable in Job work having hardness up to 45 hrc.

11. Suggested Speed & Feed ( Parameter ) – RPM=2000      Feed = 384 mm/min     

12. Suggested =  Maximum Depth of Cut=0.3 mm  & Maximum Width of Cut = 3.0 mm

13. Diameter on Cutting Edges - Tolerance is maintained as per h10 ( ISO286-2)

14. Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm

15. Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)

16. Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm

17. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

18. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

19. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.

Drawing of The Solid Carbide Endmill :  à Model No. :  SCCREM7.68X20X63X8XTiAlNX2FX0.5CR