Solid Carbide Endmill - Ø 10mm x 33mm FL x 73 mm OAL x Ø 10mm Shank - MAC3000 GRADE,6 Fluted, AlTiSiN - Baliq TiSiNos Pro Coated, Non Centre Cutting, Cup End
- Stock: 26
- Model Number: SCEM-MAC3000-10X33X73X10-AlTiSiN-6F-70HRC
- Weight: 0.10kg
- Dimensions: 10.00mm x 33.00mm x 73.00mm
“SHIVMAC”
Make
MAC3000 Grade - Solid Carbide Endmills - 6
Fluted
AlTiSiN - Baliq TiSiNos Pro Coated- Non Centre Cutting - Cup End
Model No. : SCEM-MAC3000-10X33X73X10-AlTiSiN-6F-70HRC
Main Features :
1. High Performance Solid Carbide Endmill -
Always One Step Ahead in competition.
2. Coated with AlTiSiN Coating - The latest
& Most Hard in recent PVD Coating Technology.
3. Special Geometry for all types of Hard Metal Metal
Application.
4. Manufactured with Edge Corner Protection
- No worry for early corner chip off.
5. Helix Angle 30 to 45° - Most suitable for all types
of Extreme Heat Generating Milling applications.
6. Made from Finest Grade of Solid Carbide Rods – AM70
Grade from Hyperion Hard Materials.
7. Flat Relief Angles on cutting edges suitable for
all types of Milling.
8. Latest developed End Face Geometry for Long life
Face Milling.
9. Manufactured on Advanced & Latest 5 Axis CNC
Tool & Cutter Grinding machine.
10. Hardness :: (
workable Kobe material Hardness up
to )
:: 70 hrc.
11. Suggested Speed & Feed ( Parameter ) – RPM=1500 Feed=1200mm/min
12. Suggested = Maximum Depth of Cut=0.100
mm & Maximum Width of Cut=2.00 mm
|
Cutting Diameter (d1) |
Cutting Length (l2) |
Over All length ( l1) |
Shank Diameter (d2) |
Number of Flutes |
Coating Type |
Chamfer on Shank End |
|
10.00 mm (h10) |
33 mm |
73 mm |
10.00 mm (h6) |
06 |
AlTiSiN |
0.5 mm x 45° |
-250x250h.jpg "MG SC CENTRE CUTTING ENDMILL DIA 2 MM X SHANK DIA 6 X CEL 7 X OAL 57 X 3 FLUTES X HELIX 45 DEGREE TIALN COATED")
-250x250h.jpg "SOLID CARBIDE BALL NOSE ENDMILL DIA 10 X SHANK DIA 10 X CEL19 X OAL 72 X 4 FLTS X HELIX ANGLE 30° X TIALN COATING")
-250x250w.jpg "DRILL DIA 4.8MM, SOLID CARBIDE, TOTAL LENGTH: 62MM; FLUTE LENGTH: 34MM ( Q3 )")
