MICRO GRAIN SOLID CARBIDE ENDMILL DIA 22.50mm x CEL 15mm x OAL 90mm x Shank Dia 20mm x 6 Flutes x 30 degree Helix As per Drawing No. T-20759, TiAlN Coated To machine Alloy Steel (EN21) of 28 HRC

“SHIVMAC”    Make

MICRO GRAIN SOLID CARBIDE ENDMILL DIA 22.50mm x CEL 15mm x OAL 90mm x Shank Dia 20mm x 6 Flutes x 30 degree Helix As per Drawing No. T-20759, TiAlN Coated To machine Alloy Steel (EN21) of 28 HRC  ( MAC2000 Grade )

Model No. :   SCEM22.5X15X90X20X6FXTiAlNXDrgT20759

About The Endmill :

1.    High Performance Solid Carbide Endmill  - Always One Step Ahead in competition.

2.    Coated with TiAlN Coating  - The latest in recent PVD Coating Technology.

3.    Universal Geometry for all types of Metal Application –An all round performing grade.

4.    Manufactured with Edge Corner Protection  -  No worry for early corner chip off.

5.    Helix Angle 30°

6.    Made from Ultrafine Grade of Solid Carbide Rods – K20

7.    Flat Relief Angles on cutting edges suitable for wide range of milling applications.

8.    Latest End Face Geometry for Long life Face Milling – Exclusively available in “SHIVMAC” Endmills.

9.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

10. Hardness :: 45 hrc.

11. Suggested Speed & Feed ( Parameter ) – RPM=1000      Feed=1300 mm/min     

12. Suggested =  Maximum Depth of Cut=0.8 mm  & Maximum Width of Cut = 8.0 mm

13. GENERAL TOLERANCE AS PER IS:2102  CLASS MEDIUM

14. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

15. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

16. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability

Drawing of The Solid Carbide Endmill :  à Model No. :  SCEM22.5X15X90X20X6FXTiAlNXDrgT20759