Solid Carbide Drill - Diameter 10.1 mm x 40mm Flute Length x 102mm Over All Length x 10 mm shank diameter x TiAlN Coated, 2 Spiral Fluted,; 30° Helix Angle, 140° Point Angle
- Stock: 21
- Model Number: SCD10.1X40X102X10XTiAlN
- Weight: 0.10kg
- Dimensions: 10.10mm x 40.00mm x 102.00mm
Solid Carbide Drill - Diameter 10.1 mm x 40mm Flute Length x 102mm Over All Length x 10 mm shank diameter x TiAlN Coated, 2 Spiral Fluted,; 30° Helix Angle,
140° Point Angle
“SHIVMAC” Make
MAC2000 Grade - Solid
Carbide Drill ( TiAlN Coated )
Model No. : SCD10.1X40X102X10XTiAlN
About The Drill :
1.
High Performance Solid Carbide Drill - Always One Step Ahead in competition.
2.
Coated with AlTiN Coating
- The latest in recent PVD Coating Technology.
3.
Universal Geometry for all types of Metal Application –An
all round performing grade.
4.
Manufactured with Edge Corner Protection - No
worry for early corner chip off.
5.
Helix Angle 30° - Most suitable for all types of Drilling
applications.
6.
Made from Ultrafine Grade of Solid Carbide Rods – K20/
K10 & P30 / P10.
7.
Manufactured on Advanced & Latest 5 Axis CNC Tool &
Cutter Grinding machine.
8.
Hardness :: 55 hrc.
9.
Cutting parameter : -RPM=1500, Feed=150 mm/min OR 0.100 mm per revolution.
10.
Diameter on Cutting Edges - Tolerance is maintained as per h
( ISO286-2)
11.
Flute Length & Over all length Deviation is maintained
between +/_ 2.00 mm
12.
Diameter on Shank Length – Tolerance is maintained as per h6
( ISO286-2)
13.
Ovality & Taper on Shank length is maintained equal to
or below than 0.002 mm
14.
Tool measurement & analysis is randomly done on “Zoller”
for 10% production qty.
15.
Single piece plastic box packing with sponge along cutting
edges to avoid transport breakage/chip off.
16.
Un -Identical & Unique Tool number Laser marked on each
tool for correct traceability.
Drawing of The Solid Carbide Drill : à Model No. : SCD10.1X40X102X10XTiAlN
|
Cutting Diameter (D) |
Cutting Length (I) |
Over All length ( L) |
Shank Diameter (d) |
Number of Flutes |
Coating Type |
Chamfer on Shank End |
|
10.1 mm (h7) |
40 mm |
102 mm |
10 mm (h6) |
02 |
TiAlN |
1.0 mm x 45° |
-250x250w.jpg "DRILL DIA 4.8MM, SOLID CARBIDE, TOTAL LENGTH: 62MM; FLUTE LENGTH: 34MM ( Q3 )")
COATED(1)-250x250w.jpg "Solid Carbide Drill ( Through Coolant ) For Steel Dia 11.00 mm Substantially Equivalent to SD203A-11.0-33-12R1")
-250x250h.jpg "ENDMILL P/S SOLID CARBIDE DIA 12 X SH DIA 12 X CEL 105 X OAL 150MM -GRADE P30 - TiALN COATED")
