Solid Carbide Drill Dia 12 MM Through Coolant Dia 12 x 150 Fl x 200 oal x 12 mm Shank – Through Coolant – TiSiN Coated
-550x550w.jpg "Solid Carbide Drill Dia 12 MM Through Coolant Dia 12 x 150 Fl x 200 oal x 12 mm Shank – Through Coolant – TiSiN Coated")
-550x550h.jpg "Solid Carbide Drill Dia 12 MM Through Coolant Dia 12 x 150 Fl x 200 oal x 12 mm Shank – Through Coolant – TiSiN Coated")
-550x550h.jpg "Solid Carbide Drill Dia 12 MM Through Coolant Dia 12 x 150 Fl x 200 oal x 12 mm Shank – Through Coolant – TiSiN Coated")
-80x80w.jpg "Solid Carbide Drill Dia 12 MM Through Coolant Dia 12 x 150 Fl x 200 oal x 12 mm Shank – Through Coolant – TiSiN Coated")
-80x80h.jpg "Solid Carbide Drill Dia 12 MM Through Coolant Dia 12 x 150 Fl x 200 oal x 12 mm Shank – Through Coolant – TiSiN Coated")
-80x80h.jpg "Solid Carbide Drill Dia 12 MM Through Coolant Dia 12 x 150 Fl x 200 oal x 12 mm Shank – Through Coolant – TiSiN Coated")
- Stock: 50
- Model Number: SCDTC_12x150x200x12TiSiN
- Weight: 1.00kg
- Dimensions: 12.00mm x 150.00mm x 200.00mm
“SHIVMAC” Make
Solid Carbide Drill Dia 12 MM Through Coolant Dia 12 x 150 Fl x 150 OAL x 12 mm Shank – Through Coolant – TiAlN Coated
Model No. : SCDTC_12x150x200x12TiSiN
About The Drill :
1.
High Performance Solid Carbide Drill - Always One Step Ahead in competition.
2.
Coated with TiSiN Coating
- The latest in recent PVD Coating Technology.
3.
Universal Geometry for all types of Metal Application –An
all round performing grade.
4.
Manufactured with Edge Corner Protection - No
worry for early corner chip off.
5.
Helix Angle 30° - Most suitable for all types of Milling
applications.
6.
Made from Ultrafine Grade of Solid Carbide Rods – K20
7.
Manufactured on Advanced & Latest 5 Axis CNC Tool &
Cutter Grinding machine.
8.
Hardness :: 55 hrc.
9.
Cutting parameter : -RPM=1000, Feed=100 mm/min OR 0.100 mm per revolution.
10.
Diameter on Cutting Edges - Tolerance is maintained as per h7
( ISO286-2)
11.
Flute Length & Over all length Deviation is maintained
between +/_ 2.00 mm
12.
Diameter on Shank Length – Tolerance is maintained as per h6
( ISO286-2)
13.
Ovality & Taper on Shank length is maintained equal to
or below than 0.002 mm
14.
Tool measurement & analysis is randomly done on “Zoller”
for 10% production qty.
15.
Single piece plastic box packing with sponge along cutting
edges to avoid transport breakage/chip off.
16.
Un -Identical & Unique Tool number Laser marked on each
tool for correct traceability.
Drawing of The Solid Carbide Drill : à Model No. : SCDTC_12x150x200x12TiSiN
|
Cutting Diameter (D) |
Flute Length (I) |
Over All length ( L) |
Shank Diameter (d) |
Number of Flutes |
Coating Type |
Chamfer on Shank End |
|
12.00 mm (h7) |
150 mm |
200 mm |
12 mm (h6) |
02 |
TiAlN |
1.0 mm x 45° |
-250x250w.jpg "DRILL DIA 4.8MM, SOLID CARBIDE, TOTAL LENGTH: 62MM; FLUTE LENGTH: 34MM ( Q3 )")
COATED(1)-250x250w.jpg "Solid Carbide Drill ( Through Coolant ) For Steel Dia 11.00 mm Substantially Equivalent to SD203A-11.0-33-12R1")
-250x250h.jpg "ENDMILL P/S SOLID CARBIDE DIA 12 X SH DIA 12 X CEL 105 X OAL 150MM -GRADE P30 - TiALN COATED")
