SOLID CARBIDE DRILL DIA 12.00 MM X 51MM FLUTE LEGTH X 102MM OVER ALL LENGTH X 12 MM SHANK - ALTIN COATED
- Stock: 26
- Model Number: SCD12.0X51X102X12XAlTiN
- Weight: 0.50kg
- Dimensions: 12.00mm x 51.00mm x 102.00mm
“SHIVMAC” Make
SOLID CARBIDE DRILL
DIA 12.00 MM X 51MM FLUTE LEGTH X 102MM OVER ALL LENGTH X 12 MM SHANK - ALTIN
COATED
MAC2000 Grade
- Solid Carbide Drill ( AlTiN Coated )
Model No. : SCD12.0X51X102X12XAlTiN
About
The Drill :
1. High Performance
Solid Carbide Drill - Always One Step Ahead in competition.
2. Coated with AlTiN
Coating - The latest in recent PVD Coating Technology.
3. Universal Geometry
for all types of Metal Application –An all round performing grade.
4. Manufactured with
Edge Corner Protection - No worry for early corner chip off.
5. Helix Angle 30° -
Most suitable for all types of Drilling applications.
6. Made from Ultrafine
Grade of Solid Carbide Rods – K20
7. Manufactured on
Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.
8. Hardness of
Workable job material :: up to 45 hrc.
9. Cutting parameter :
-RPM=1350 , Feed=203 mm/min OR
0.150 mm per revolution.
10. Diameter on Cutting Edges - Tolerance is maintained
as per h7 ( ISO286-2)
11. Flute Length & Over all length Deviation is
maintained between +/_ 2.00 mm
12. Diameter on Shank Length – Tolerance is maintained
as per h6 ( ISO286-2)
13. Ovality & Taper on Shank length is maintained
equal to or below than 0.002 mm
14. Tool measurement & analysis is randomly done on
“Zoller” for 10% production qty.
15. Single piece plastic box packing with sponge along
cutting edges to avoid transport breakage/chip off.
16. Un -Identical & Unique Tool number Laser marked
on each tool for correct traceability.
Drawing of The Solid Carbide Drill : à Model No. : SCD12.0X51X102X12XAlTiN
|
Cutting Diameter (D) |
Cutting Length (I) |
Over All length ( L) |
Shank Diameter (d) |
Number of Flutes |
Coating Type |
Chamfer on Shank End |
|
12.00 mm (h7) |
51 mm |
102 mm |
12 mm (h6) |
02 |
AlTiN |
1.0 mm x 45° |
-250x250w.jpg "DRILL DIA 4.8MM, SOLID CARBIDE, TOTAL LENGTH: 62MM; FLUTE LENGTH: 34MM ( Q3 )")
COATED(1)-250x250w.jpg "Solid Carbide Drill ( Through Coolant ) For Steel Dia 11.00 mm Substantially Equivalent to SD203A-11.0-33-12R1")
-250x250h.jpg "ENDMILL P/S SOLID CARBIDE DIA 12 X SH DIA 12 X CEL 105 X OAL 150MM -GRADE P30 - TiALN COATED")
