Solid Carbide Endmill - Ø 4mm x 18mm FL x 60 mm OAL x Ø 4mm Shank - 4 F - MAC2000 GRADE, AlTiN Coated with Centre Cutting

“SHIVMAC”    Make

Solid Carbide Endmill  -  Ø 4mm x 18mm FL x 60 mm OAL x Ø 4mm Shank  - 4 F - MAC2000 GRADE, AlTiN Coated with Centre Cutting

Model No. :   SCEM4x18x60x4x4FxAlTiNx35°

Main Features :

1.    High Performance Solid Carbide Endmill  - Always One Step Ahead in competition.

2.    Coated with AlTiN Coating  - The latest in PVD Coating Technology.

3.    Special Geometry for all types of Metal Application.

4.    Manufactured with Edge Corner Protection  -  No worry for early corner chip off.

5.    Helix Angle 35° - Most suitable for all types of Extreme Heat Generating Milling applications.

6.    Made from Finest Grade of Solid Carbide Rod.

7.    Flat Relief Angles on cutting edges suitable for all types of Milling.

8.    Latest developed End Face Geometry for Long life Face Milling.

9.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

10. Hardness ::  ( workable Kobe material Hardness  up to  )  ::  40 hrc.

11. Suggested Speed & Feed ( Parameter ) – RPM=3900       Feed=900mm/min     

       12. Suggested =  Maximum Depth of Cut=0.4 mm  & Maximum Width of Cut=2.00 mm

13. Diameter on Cutting Edges - Tolerance is maintained as per h10 ( ISO286-2)

14. Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm

15. Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)

16. Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm

17. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

18. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

19. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.