PARALLEL SHANK SOLID CARBIDE END MILL CUTTER DIA 5.0 MM, FLUTE LENGTH MIN. 30MM, OVERALL LENGTH MIN. 75 MM, SHANK DIA 5.0 MM WITH TILAN COATING - 4F
-550x550h.jpg "PARALLEL SHANK SOLID CARBIDE END MILL CUTTER DIA 5.0 MM, FLUTE LENGTH MIN. 30MM, OVERALL LENGTH MIN. 75 MM, SHANK DIA 5.0 MM WITH TILAN COATING - 4F")
- Stock: 51
- Model Number: SCEM5X30X75X5TIALN4F
- Weight: 0.10kg
- Dimensions: 5.00mm x 30.00mm x 75.00mm
PARLLEL SHANK SOLID CARBIDE END MILL CUTTER DIA 5.0 MM, FLUTE LENGTH MIN. 30MM, OVERALL LENGTH MIN. 75 MM, SHANK DIA 5.0 MM WITH TiAln COATING - 4F
SHIVMAC” Make
MAC2000ECO Grade - Solid
Carbide Endmills
Flat End - 4 Fluted - TiAlN Coated
Model No. : SCEM5X30X75X5TIALN
About The Endmill :
1.
High Performance Solid Carbide Endmill - Always One Step Ahead in competition.
2.
Coated with AlTiN Coating
- The latest in recent PVD Coating Technology.
3.
Universal Geometry for all types of Metal Application –An
all round performing grade.
4.
Manufactured with Edge Corner Protection - No
worry for early corner chip off.
5.
Helix Angle 30° - Most suitable for all types of Milling
applications.
6.
Made from Ultrafine Grade of Solid Carbide Rods – K20/
K10 & P30 / P10.
7.
Flat Relief Angles on cutting edges suitable for wide range
of milling applications.
8.
Latest End Face Geometry for Long life Face Milling –
Exclusively available in “SHIVMAC” Endmills.
9.
Manufactured on Advanced & Latest 5 Axis CNC Tool &
Cutter Grinding machine.
10.
Hardness :: 55 hrc.
11.
Suggested Speed & Feed ( Parameter ) – RPM=3200 Feed=1200 mm/min
12.
Suggested = Maximum
Depth of Cut=0.250 mm & Maximum
Width of Cut = 2.5 mm
13.
Diameter on Cutting Edges - Tolerance is maintained as per
h10 ( ISO286-2)
14.
Flute Length & Over all length Deviation is maintained
between +/_ 2.00 mm
15.
Diameter on Shank Length – Tolerance is maintained as per h6
( ISO286-2)
16.
Ovality & Taper on Shank length is maintained equal to
or below than 0.002 mm
17.
Tool measurement & analysis is randomly done on “Zoller”
for 10% production qty.
18.
Single piece plastic box packing with sponge along cutting
edges to avoid transport breakage/chip off.
19.
Un -Identical & Unique Tool number Laser marked on each
tool for correct traceability.
Drawing of The Solid Carbide Endmill : à Model No. : SCEM5X30X75X5TIALN
|
Cutting Diameter
(d1) |
Cutting Length (l2) |
Over All length (
l1) |
Shank Diameter (d2) |
Number of Flutes |
Coating Type |
Chamfer on Shank End |
|
5.00 mm (h10) |
30 mm |
75
mm |
5.00 mm (h6) |
04 |
TiALN |
0.5 mm x 45° |
-250x250h.jpg "ENDMILL P/S SOLID CARBIDE DIA 12 X SH DIA 12 X CEL 105 X OAL 150MM -GRADE P30 - TiALN COATED")
-250x250w.jpg "DRILL DIA 4.8MM, SOLID CARBIDE, TOTAL LENGTH: 62MM; FLUTE LENGTH: 34MM ( Q3 )")
