SOLID CARBIDE BALL NOSE ENDMILL DIA 10 X SHANK DIA 10 X CEL19 X OAL 72 X 4 FLTS X HELIX ANGLE 30° X TIALN COATING

“SHIVMAC”    Make

MAC2000ECO Grade  - Solid Carbide Endmills

Suqare End    - 4 Fluted    -     TiAlN Coated

Model No. :   SCBN10X19X72X10XTIALN

About The Endmill :

1.    High Performance Solid Carbide Ballnose  - Always One Step Ahead in competition.

2.    Coated with TiAlN Coating  - The latest in recent PVD Coating Technology.

3.    Universal Geometry for all types of Metal Application –An all round performing grade.

4.    Perfect for Profile Milling applications.

5.    Helix Angle 30 °

6.    Made from Ultrafine Grade of Solid Carbide Rods – K20

7.    Flat Relief Angles on cutting edges suitable for wide range of milling applications.

8.    Newly developed Ball Face Geometry for Long life Profile Milling – Exclusively available in “SHIVMAC” Endmills.

9.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

10. Hardness :: 55 hrc.

11. Suggested Speed & Feed ( Parameter ) – RPM=2000 & Feed=700 mm/min     

12. Suggested =  Maximum Depth of Cut= 0.2 mm  & Maximum Width of Cut = 2.0 mm

13. Diameter on Cutting Edges - Tolerance is maintained as per h10 ( ISO286-2)

14. Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm

15. Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)

16. Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm

17. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

18. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

19. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.

Drawing of The Solid Carbide Endmill :  à     Model No. :  SCBN10X19X72X10XTIALN