SOLID CARBIDE DRILL DIA 3.20 X 22 FL X 50 OAL X 4.00 SHANK X AlTiN coated with 90° Point Angle
- Stock: Pre-Order
- Model Number: SCD3.2X22X50X4XALTINx90°PA
- Weight: 0.10kg
- Dimensions: 3.20mm x 22.00mm x 50.00mm
“SHIVMAC” Make
SOLID CARBIDE DRILL DIA 3.20 X 22 FL X 50 OAL X 4.00 SHANK X AlTiN
coated with 90° Point Angle
MAC2000 Grade - Solid Carbide Drill ( AlTiN Coated )
Model No. : SCD3.2X22X50X4XALTINx90°PA
About The Drill :
1. High Performance Solid Carbide Drill - Always One Step Ahead in competition.
2. Coated with AlTiN Coating - The latest in recent PVD Coating Technology.
3. Universal Geometry for all types of Metal Application –An all round performing grade.
4. Manufactured with Edge Corner Protection - No worry for early corner chip off.
5. Helix Angle 30° - Most suitable for all types of Drilling applications.
6. Made from Ultrafine Grade of Solid Carbide Rods – K20
7. Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.
8. Hardness of Workable job material :: up to 45 hrc.
9. Cutting parameter : -RPM=3600 , Feed=216 mm/min OR 0.060mm per revolution.
10. Diameter on Cutting Edges - Tolerance is maintained as per h7 ( ISO286-2)
11. Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm
12. Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)
13. Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm
14. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.
15. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.
16. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.
Drawing of The Solid Carbide Drill : à Model No. : SCD3.2X22X50X4XALTINx90°PA
Cutting Diameter (D) | Cutting Length (I) | Over All length ( L) | Shank Diameter (d) | Number of Flutes | Coating Type | Chamfer on Shank End |
3.2 mm (-0.018) | 22 mm | 50 mm | 4 mm (h6) | 02 | AlTiN | 0.5 mm x 45° |
-250x250w.jpg "DRILL DIA 4.8MM, SOLID CARBIDE, TOTAL LENGTH: 62MM; FLUTE LENGTH: 34MM ( Q3 )")
COATED(1)-250x250w.jpg "Solid Carbide Drill ( Through Coolant ) For Steel Dia 11.00 mm Substantially Equivalent to SD203A-11.0-33-12R1")
-250x250h.jpg "ENDMILL P/S SOLID CARBIDE DIA 12 X SH DIA 12 X CEL 105 X OAL 150MM -GRADE P30 - TiALN COATED")
