SOLID CARBIDE ENDMILL CUTTER DIA 4 X CEL 16 X OAL 70 X SHANK 10mm X 4 FLUTED

“SHIVMAC”    Make

MAC2012-UF Grade  - SOLID CARBIDE ENDMILL CUTTER DIA 4 X FL 16 X OAL 70 X SHANK 10mm X  4 FLUTED  Suqare End    - 4 Fluted    -   TiSiN Coated

Model No. :   SCEM4X16X70X10XTiSiN

About The Endmill :

1.    High Performance Solid Carbide Endmill  - Always One Step Ahead in competition.

2.    Coated with TiSiN Coating  - The latest in recent PVD Coating Technology.

3.    Universal Geometry for all types of Metal Application –An all round performing grade.

4.    Manufactured with Edge Corner Protection  -  No worry for early corner chip off.

5.    Helix Angle 30°

6.    Made from Ultrafine Grade of Solid Carbide Rods – K20

7.    Flat Relief Angles on cutting edges suitable for wide range of milling applications.

8.    Newly developed End Face Geometry for Long life Face Milling – Exclusively available in “SHIVMAC” Endmills.

9.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

10. Hardness :: 55 hrc.

11. Suggested Speed & Feed ( Parameter ) – RPM=4000  & Feed=950 mm/min     

12. Suggested =  Maximum Depth of Cut= 0.2 mm  & Maximum Width of Cut = 2.0 mm

13. Diameter on Cutting Edges - Tolerance is maintained as per h10 ( ISO286-2)

14. Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm

15. Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)

16. Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm

17. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

18. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

19. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.

Drawing of The Solid Carbide Endmill :  à     Model No. :  SCEM4X16X70X10XTiSiN