SOILD CARBIDE HOLE MILL CUTTER TO DRG. NO. FS/4298/1 (SIZE: - 3.15 MM DIA. ) ( Q3 )

Solid Carbide (K-20) Holemill 2 Helical RH Fluted with centre cutting, Uncoated with Polished Finish - With Sharp Corner

as per drawing no. FS/T-4298/1

“SHIVMAC”    Make

MAC2000ECO Grade  - Solid Carbide Holemill

Flat End     - 2 Fluted    -     Polished Finish & Uncoated

Model No. :   SCHM3.15X20X50X3-2F-PF

About The Endmill :

1.    High Performance Solid Carbide Holemill  - Always One Step Ahead in competition.

2.    Un coated with Polished Finish 

3.    Universal Geometry for all types of Metal Application –An all round performing grade.

4.    Manufactured with Sharp Corner cutting Edges .

5.    Helix Angle 15°

6.    Made from Ultrafine Grade of Solid Carbide Rods – K20

7.    Flat Relief Angles on cutting edges suitable for wide range of HOLMILLING applications.

8.    Latest End Face Geometry for Long life Hole Milling – Best suitable for Centre Cutting application.

9.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

10. Hardness :: 45 hrc.

11. Suggested Speed & Feed ( Parameter ) – RPM=4200      Feed = 190 mm/min (or) 0.045mm/rev 

13. Diameter on Cutting Edges - Tolerance is maintained as per +0.015 / -0.000

14. Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm

15. Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)

16. Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm

17. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

18. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

19. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.

Drawing of The Solid Carbide Holmill :  à 

Model No. :  SCHM3.15X20X50X3-2F-PF