SOLID CARBIDE DRILL DIA 1.90 X 35 FL X 60 OAL X 4.00 SHANK X AlTiN coated with 90° Point Angle

“SHIVMAC”    Make

SOLID CARBIDE DRILL DIA 1.90 X 35 FL X 60 OAL X 4.00 SHANK X AlTiN coated with 90° Point Angle

MAC2000 Grade  - Solid Carbide Drill ( AlTiN Coated )

Model No. : SCD1.9X35X60X4XALTINx90°PA

About The Drill  :

1.    High Performance Solid Carbide Drill  - Always One Step Ahead in competition.

2.    Coated with AlTiN Coating  - The latest in recent PVD Coating Technology.

3.    Universal Geometry for all types of Metal Application –An all round performing grade.

4.    Manufactured with Edge Corner Protection  -  No worry for early corner chip off.

5.    Helix Angle 30° - Most suitable for all types of Drilling applications.

6.    Made from Ultrafine Grade of Solid Carbide Rods – K20

7.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

8.    Hardness of Workable job material  :: up to 45 hrc.

9.    Cutting parameter : -RPM=5100 ,   Feed=204 mm/min    OR     0.040mm per revolution.

10. Diameter on Cutting Edges - Tolerance is maintained as per h7 ( ISO286-2)

11. Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm

12. Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)

13. Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm

14. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

15. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

16. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.

Drawing of The Solid Carbide Drill :  à Model No. : SCD1.9X35X60X4XALTINx90°PA