MICRO GRAIN SOLID CARBIDE CENTRE CUT TIALN COATED ENDMILL DIA 10MM X CR 2MM X SHANK DIA 10MM X CEL 22MM X OAL 72MM 4F, 30° HELIX ANGLE

“SHIVMAC”    Make

MAC2000ECO Grade  - Solid Carbide Endmills - Corner Radius - 2 mm

Suqare End  - Centre Cutting  - 4 Fluted    -     TiAlN Coated

Model No. :   SCCREM10X22X72X10XTIALNX2CR

About The Endmill :

1.    High Performance Solid Carbide Endmill  - Always One Step Ahead in competition.

2.    Coated with TiAlN Coating  - The latest in recent PVD Coating Technology.

3.    Universal Geometry for all types of Metal Application –An all round performing grade.

4.    Manufactured with Edge Corner Protection  -  No worry for early corner chip off.

5.    Helix Angle 30°

6.    Made from Ultrafine Grade of Solid Carbide Rods – K20

7.    Flat Relief Angles on cutting edges suitable for wide range of milling applications.

8.    Newly developed End Face Geometry for Long life Face Milling – Exclusively available in “SHIVMAC” Endmills.

9.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

10. Hardness :: 55 hrc.

11. Suggested Speed & Feed ( Parameter ) – RPM=1950  & Feed=900 mm/min     

12. Suggested =  Maximum Depth of Cut= 0.50 mm  & Maximum Width of Cut = 5.0 mm

13. Diameter on Cutting Edges - Tolerance is maintained as per h10 ( ISO286-2)

14. Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm

15. Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)

16. Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm

17. Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

18. Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

19. Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.

Drawing of The Solid Carbide Endmill :  à     Model No. :  SCCREM10X22X72X10XTIALNX2CR