ENDMILL P/S SOLID CARBIDE DIA 12 X SH DIA 12 X CEL 105 X OAL 150MM -GRADE P30 - TiALN COATED

“SHIVMAC”    Make

MAC2000ECO Grade  - Solid Carbide Endmills

Flat End/Square End  - 4 Fluted - TiAlN Coated

Model No. :   SCEM12X105X150X12XTiAlN

Main Features :

1.    High Performance Solid Carbide Endmill  - Always One Step Ahead in competition.

2.    Coated with TiAlN Coating  - The latest in recent PVD Coating Technology.

3.    Universal Geometry for all types of Metal Application –An all round performing grade.

4.    Manufactured with Edge Corner Protection  -  No worry for early corner chip off.

5.    Helix Angle 30° - Most suitable for all types of Milling applications.

6.    Made from Finest Grade of Solid Carbide Rods – P30 

7.    Flat Relief Angles on cutting edges suitable for Long length Endmills.

8.    Latest developed End Face Geometry for Long life Face Milling.

9.    Manufactured on Advanced & Latest 5 Axis CNC Tool & Cutter Grinding machine.

10. Hardness :: 55 hrc.

11. Suggested Speed & Feed ( Parameter ) – RPM=2150       Feed=1200 mm/min     

12. Suggested =  Maximum Depth of Cut=0.6 mm  & Maximum Width of Cut=4.0 mm

13.    Diameter on Cutting Edges - Tolerance is maintained as per h10 ( ISO286-2)

14.    Flute Length & Over all length Deviation is maintained between +/_ 2.00 mm

15.    Diameter on Shank Length – Tolerance is maintained as per h6 ( ISO286-2)

16.    Ovality & Taper on Shank length is maintained equal to or below than 0.002 mm

17.    Tool measurement & analysis is randomly done on “Zoller” for 10% production qty.

18.    Single piece plastic box packing with sponge along cutting edges to avoid transport breakage/chip off.

19.  Un -Identical & Unique Tool number Laser marked on each tool for correct traceability.